Programmeerbare spuitpomp

Name: Programmeerbare spuitpomp
Brand: Nanjing Runze Fluid Control Equipment Co., LTD.

Programmeerbare spuitpomp MiNi SY-04 was een van onze patentproducten die zich richt op het nauwkeurig overbrengen van vloeistoffen van microliter naar milliliter met de ondersteuning van 0,9 ° stappenmotor, loodschroef en hoge precisie borosilicaatcilinder, kleine voetafdruk en brede communicatie-interfaces maken ditPrecisie spuit pompVeel voorkeur door moderne kleinschalige apparatuur.

TY_SEND_MAIL

Video of Programmable Syringe Pump

Model Numbers of Programmable Syringe Pump

Product Structure of Programmable Syringe Pump

Programmable Syringe Pump Structure

Specification of Programmable Syringe Pump

Model No.	MiNi SY-04
Accuracy	≤1% @100% stroke
Precision (Repeatability)	3‰ - 7‰ @100% stroke
Pressure rating	0-1.0Mpa (air)	0-1.2Mpa (water)
Service life	3 million times no leakage (test media: water ; 1 stoke = once)
Innitial position detection	Photosensor detect original piston position
Rated stroke (control steps)	5ml	10ml	20ml
	30mm (12000 steps)	24.08mm (9632 steps)	24mm (9600 steps)
Syringe ID	14.55mm	23mm	32mm
Motor speed	300rpm	300rpm	250pm
Linear speed	0.017mm/s – 5mm/s
Running time (stroke)	6s – 1765s	4.8s – 1416s	5.76s – 1412s
Resolution	0.0025mm/0.4154μL	0.0025mm/1.0381μL	0.0025mm/2.0833μL
Actuator	KSS Ball screw (lead 1mm)
Wetted material	Borosilicate glass, PTFE
Pressure rating	Positive air pressure 0-1.0Mpa / Negative air pressure 0-0.05Mpa (during test)
Connection	1/4-28UNF
Communication	RS232/RS485/CAN
Baud rate	RS232/RS485: 9600dps, 19200dps, 38400dps, 57600dps, 115200dps CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps
Address & Parameter setting	Communication interface
Power supply	DC24V/1.5A
Max Power	15W
Operating temperature	5℃ – 55℃
Operating humidity	< 80% non-condensing
Dimension (LWH)	4242191mm (without driver) 4242206.2mm (with driver)
Net Weight	0.72kg

Driver Port of Programmable Syringe Pump

Programmable Syringe Pump Driver Port

Port	Description	Port	Description
H	CANH	B+/B-	Phase B wiring
L	CANL	A+/A-	Phase A wiring
A	RS485 A	O1	Optocoupler wiring
B	RS485 B	O2
GND	GND	O3
RX	RS232 RX	V1
TX	RS232 TX	V2
-	DC24V positive	V3
+	DC24V negative	GND